conventional tool
英 [kənˈvenʃənl tuːl]
美 [kənˈvenʃənl tuːl]
标准工具
双语例句
- Conventional wisdom may suggest that your key tool of influence is the power or formal authority that comes with your title.
传统观点认为，施加影响的核心工具，就是你的头衔带给你的权力或者正式职权。 - Personally, I tend to interpret his sprint legend with the conventional wisdom of the old aphorism: "A tool is only as powerful as its user."
我则会将他的成就归因于那句谚语：“工具因它的使用者而强大。” - Conventional double tube bits should be used as bits for drilling, while coring tool is double tube.
当取心钻具采用双层管时，钻进所用的钻头就需要用普通双管钻头。 - The radial investigation depth of conventional acoustic well logging tool is much less than the hydrated depth of mud shale.
普通声波测井的径向探测深度甚小于泥页岩的水化深度，在水基钻井液井孔中只能测到泥页岩水化后的信息。 - The induced polarization decay curve contains more information than the polarizability which was used in the conventional induced polarization logging tool.
激发极化衰减谱比极化率具有更为丰富的储层信息，与地层的孔隙结构、渗透率、地层水电阻率以及泥质含量密切相关。 - It has proved that this new tool is much better than conventional solid HSS tool in production practices.
生产实践表明其性能、效率和寿命等皆优于原整体高速钢刀具。 - The wire-line coring tool of HSQ serial has kept up the technical features of conventional placer drills and derived the advanced structure from steel cable fishing tool for inner barrel.
HSQ系列绳索取心钻具，既保持了现用砂钻钻进的工艺特点，又发挥了钢绳打捞内管技术的方便性。 - Conventional PC CNC System and its Application in Machine Tool CNC Refinement
通用PC数控系统设计及其在机床数控化改造中的应用 - Furthermore it introduces conventional process CAPP developing tool system in overall constraction, and the design principle, functions and characteristics.
同时介绍了常规工艺CAPP开发工具系统（HCCAPPDTS系统）的总体结构和各构造工具的设计原理、功能作用及特点。 - Coal-bed has special physical and mechanical properties and coal-bed gas well has special requirements for coal coring. So conventional coring tool and technology can not meet the coring operation of coal-bed gas well and its core recovery is only about 30%.
由于煤层具有特殊的物理、力学性质，以及煤层气井对煤心采样的特殊要求，致使常规石油钻井取心工具和工艺无法适应煤层气井的取煤心作业，取心收获率只有30%左右。 - Open CNC Reformation for Active Conventional Machine Tool
现役普通机床的开放式CNC改造 - The good cutting performance of the conventional HSS ( W 18 Cr4V) cutting tool, subjected to a new surface chemical heat-treatment technique has been studied in this paper.
本文研究了经一种新的表面化学热处理工艺处理过的通用高速钢（W18Cr4V）刀具所具有的优良切削性能。 - Compared with other conventional caliper meters, data recorded by the new multi-arm caliper tool are more comprehensive and the imaging effects are also more visible.
与常规的井径仪相比，新型的多臂井径仪测量得到的信息更全面，资料的成像处理效果更直观。 - After research, analysis and operation, a countermeasure is put forward to solve such cutting bed problems in extended reach well by way of "conventional method of removing the cuttings", utilizing steerable rotary drill tool and the drilling slim hole.
认为常规清岩法，利用旋转自动导向系统以及小井眼钻井的方法可以解决大位移水平井岩屑床问题。 - Crack-free surface that is formed in ductile regime of glass can be obtained under conventional cutting conditions if the tool parameters are chosen properly.
如果刀具参数选取得当，能在常规切削用量下获得在玻璃的塑性域内形成的、无微裂纹的加工表面。 - Conventional Process CAPP Developing tool System Based on GT
基于GT的常规工艺CAPP开发工具系统 - The paper presents an approach to machining the aligning pinhole of crankcase with conventional machine tool, which meets the coaxial requirement
介绍用普通机床加工曲轴箱定位销孔，达到同轴度要求的一种方法 - The appearance of high-speed machining has led to great transform in machine tool drive and its structure, thus it is difficult to meet the requirements of high-speed machining by using conventional planer-type machine tool.
高速加工的出现引起了机床结构与传动的重大变革，传统龙门式机床已很难适应高速加工发展的需要。 - Conventional TCP tech is only limited to the combination of that with MFE tool which accomplishes opening or closing the down valve by hoisting up or setting down testing string and not suits for operation of special well to cause low successful ratio and safe reliability.
传统的油管传输射孔技术仅限于单管柱传输射孔与MFE测试工具联作，通过上提下放管柱来实现井下测试阀的开关，不适合特殊井的施工，施工成功率低，安全可靠性差。 - At present, PCR has been one item of conventional technology in laboratory, which is an necessary tool for molecular-biology.
目前，PCR已成为实验室中的一项常规技术，是分子生物学家们不可缺少的工具。 - Then the fuzzy reliability-optimization design model was transformed into conventional optimization model, and the optimal results were obtained by a calculating tool of MATLAB.
通过将模糊可靠性优化设计模型转化为常规的优化设计模型，并运用计算功能强大的MATLAB对其求解。 - However, these free-form curves have to be converted into a series of straight line or circular segments in order to be executed on a conventional numerical control machining tool.
但是目前大多数数控系统都只支持传统的直线或圆弧插补器，实际加工时需要将这些在CAD、CAM里建模的自由曲线转换成直线段或圆弧段来执行。 - Analyzed the control mechanism of the conventional ultra-precision machine tool controller. Through the analysis of the object uncertainty and the input signal to the tracking error, determined that the initial location controller of PI could be used to the ultra-precision machine. 4.
分析了超精密机床常规位置控制器的控制机理，通过对超精密机床对象不确定性和对输入信号跟踪误差的分析，初步确定超精密机床位置控制器可以采用PI的控制形式。 - MRPP method was different from other conventional five-axis tool paths generation methods in mode of tool path generation and calculation.
加工域并行规划法在刀路生成方式和计算模式上与传统的五轴刀具路径规划方法不同。 - After long period efforts, reservoir prediction and description of sandstone in Bohai Sea has made great progress, and at the same time, reservoir numerical simulation has also become conventional oil field development tool.
多年来，国内外砂岩油藏的储层预测和油藏描述取得了巨大进步，同时油藏数值模拟也成为油田开发的常规研究工具。 - Monoclonal antibody has the specificity of antigen binding compared with conventional serum antibody. It is the most important tool of the immunology and serology and also has been used in the veterinary diagnosis and treatment of diseases widely.
与常规免疫血清相比，单克隆抗体具有与抗原结合的高特异性，是免疫学和血清学研究的重要工具，在畜牧兽医的疾病诊断与治疗方面已经被广泛应用。 - The value of tool wear in ultrasonic vibration cutting of different work-piece has been tested and compared with the experimental results in conventional cutting; Also the influence of tool rake angle and tool nose radius on machined surface roughness in ultrasonic vibration cutting has been researched.
实测了超声波振动切削不同工件材料时的刀具磨损值，并与普通切削试验结果进行了对比；同时研究了超声振动切削时刀具前角和刀尖圆弧半径对切削表面粗糙度的影响。 - In this paper, the author maked use of indentation fracture analyzed material removal mechanism, with the effect of conventional grinding process mechanics, analysis the trajectory of grit on different tool positions removal material in ultrasonic grinding.
本文利用压痕断裂力学理论分析了氮化硅陶瓷材料去除原理，并结合常规磨削过程材料去除机理，分析了超声磨削加工中刀具不同位置磨粒的运动轨迹对材料去除的影响。 - "Living"/ controlled radical polymerization ( LRP), other than conventional radical polymerization, is an important tool to allow to design polymers with predetermined architecture and properties.
活性/可控自由基聚合与传统自由基聚合相比能更好地实现对分子结构的控制，是实现分子设计、合成具有特定结构和性能的聚合物的重要手段。 - It has been widely used in studying magnetic materials, and has now become a conventional tool for the characterization of physical property.
在研究磁性材料方面得到了广泛的应用，现在几乎成为一种常规的物性表征手段。